minibiznes.ru
  1. Главная
  2. Бабушка Секс

Sah?n aga 2kad?n? s?k?yor porno



Unpack the fan heater sah?n aga 2kad?n? s?k?yor porno the power cord. Remove all packaging materials and dispose sah?n aga 2kad?n? s?k?yor porno them for recycling 3.

Mount the fan heater vertically on a straight wall. Strict- ly observe the safety distances shown in Fig. Observe your local safety regulations. Do not mount the fan heater on combustible or instable surfaces e. Use the wall bracket 12 as a drill template.

Mark two holes and drill them in the wall. Insert the two plugs into the holes and fix the wall bra- cket 12 onto the wall with the two long screws.

Make sure that the horizontal hole of the wall bracket is on the left side and the vertical hole on the right side and that the indent is open to the top. Make sure that the wall bracket is fixed securely to the wall. Hang the fan heater on the wall bracket Make sure that it locks firmly into the indent on the wall bracket Adjust the hole in the wall bracket to fit the one in the ope- ning and secure the fan heater on the wall bracket 12 with the medium long screw.

Make sure that the fan heater is mounted securely and cannot fall off. Sah?n aga 2kad?n? s?k?yor porno the metal hanger 16 into the plastic mount Adjust the hole in the plastic mount 15 to fit the one in the metal hanger 16 and secure the two parts with the short screw. Push the plastic mount 15 into the holder 14 on the rear side of the fan heater until it clicks into position. Sah?n aga 2kad?n? s?k?yor porno sure that the plastic mount 15 is fitted securely, and that it cannot become loose and fall off.

Check that sah?n aga 2kad?n? s?k?yor porno rotary power switch 2 is in the OFF 3 position. Insert the power plug into the power socket. Do not touch the power cord with wet hands. Make sure that the air intake vent 9 and air outlet vent 10 are not covered up and that no objects have managed to get into them.

The air intake vent 9 and air outlet vent 10 must always be free when the fan heater is in use. Before handling, moving or cleaning the fan heater, turn the rotary power switch 2 to the OFF 3 position and disconnect the power plug from the power socket. Turn the rotary power switch 2 to the desired opera- ting position: Warm air W 4 Hot air W 5 The power control lamp 1 lights up. When the rotary power switch 2 is in the hot air W 5 position, you cannot turn it further in a clockwise direction, only in an anti-clockwise direction.

When the towel-rail is mounted, the heating performan- ce is automatically reduced to W. Rotary thermostat switch 1. When you operate the fan heater in the warm air 4 or hot air 5 position, turn the rotary thermostat switch 6 clockwise to the highest position 8. The fan heater now switches off. Turn the rotary thermostat switch 6 slightly in a clockwi- se direction. The fan heater now switches the heating on and off automatically sah?n aga 2kad?n? s?k?yor porno maintain the desired room temperature.

The further you turn the rotary thermostat switch clock- wise, the hotter the sah?n aga 2kad?n? s?k?yor porno temperature will get. The highest position equals a room temperature of approx. The lowest position 7 equals a room temperature of approx. When the rotary thermostat switch 6 is in the highest position 8you can not turn it any further in a clockwise direction, only anticlockwise.

The fan heater sah?n aga 2kad?n? s?k?yor porno equipped with overheating protection which switches the fan heater off automatically if it over- heats.

Turn the rotary power switch 2 to OFF 3 and discon- nect the power plug from the power socket. Now let the fan heater cool for at least 30 minutes. Remove any objects which might have got into the air intake vent 9 or air outlet vent 10or clean the ope- nings which have sah?n aga 2kad?n?

s?k?yor porno the faulty running with a vacuum cleaner or have caused overheating. If you can see that a lot of dust has accumulated inside the fan heater, please get the appliance cleaned at a service centre. We recommend you to clean the fan heater regularly. Plea- se follow the instructions for cleaning and maintenance so as to avoid impairing the functioning of the appliance. Before you start cleaning the fan heater, turn the rotary power switch 2 to OFF 3 and disconnect the power plug from the power socket.

Allow the fan heater to cool for at least 30 minutes. Take the fan heater off the wall bracket. Clean the air inta- ke vent 9 and air outlet vent 10 with a vacuum cleaner, to remove the dust from the motor and heating element.

Clean the outer sah?n aga 2kad?n? s?k?yor porno of the fan heater with a soft, damp cloth. The fan heater needs no special maintenance, but it should be serviced at least twice a year.

If the fan heater has to be repaired, be sure to contact an authorized service centre. This symbol on the product or its packaging indicates that the appliance cannot be treated as normal domestic trash, but must be handed in at a collection point for recycling electric and electronic appliances. Your contribution to the correct disposal of this product protects the environment and the health of your fellow men.

Health and the environment are endangered by incorrect disposal. Further information about the recycling of this product can be obtained from your local town hall, your refuse collection service, or sah?n aga 2kad?n? s?k?yor porno the store at which you bought the product. This regulation is valid only in EU member states. The purchaser or user must himself or herself decide when and for how long sah?n aga 2kad?n? s?k?yor porno KAZ product is in use. In UK the unit must be hard-wird.

National rules and regulations must be observed.



Похожее видео:

© 2018 minibiznes.ru.